Rail mounted Clamps with window sizes ranging from 2” round up to 12”X 9”. For embroidering on everything from baby clothes to luggage.

Slim Line 1 Window Sizes
Slim Line 2 Window Sizes

The SLIM LINE Clamping Systems are the lowest profile embroidery clamps on the market. The patented low profile design is only 1” high so it fits easily under the needle bar throughout the entire range of machine movements. The flat spring steel clamping arms maintain pressure on fabric and backing through a wide range of fabrics and thicknesses.

There are two Clamping Chassis sizes available for the SLIM LINE Series of embroidery clamps, each with a set of available windows to fit the two different chassis sizes. The SLIM LINE clamps mount to the drive bar of your embroidery machine using the same mounting holes that mount the tubular arms for your plastic hoops. Mounting adapters specially designed for your machine type and size are attached to the chassis and then the assembly attaches to your machine. Hoop Tech manufactures mounting adapters for all major industrial size machines as well as smaller machines such as Brother PR & Baby Lock machines.

Clamps for full size Industrial Embroidery Machines
Slim Line Clamp 6x5 WindowSLIM LINE -1 Clamp w/ 6”x 5” Window
Slim Line Clamp 12x9 WindowSLIM LINE -1 Clamp w/ 12”x 9” Window
Clamps for Brother PR Series & Baby Lock Machines
Babylock and PR Series Clamp 6x5PR -1 Clamp w/ 6”x 5” Window
Babylock and PR 2 Clamp set 11x5 8x5PR - 2 Clamp Set w/ 11”x 5” & 8”x 5” Windows Sets
Slim Line Mounting Adapters
All of the SLIM LINE Clamps use a spring loaded clamping chassis to hold interchangeable upper and lower clamping windows. The windows clamp the fabric and backing between the upper and lower window frames and hold the fabric in position during sewing.
The SLIM LINE chassis/window assembly attaches to the embroidery machine on the drive bar using mounting adapters. Adapter styles are available for nearly all major industrial embroidery machine manufacturers and machine types.
Slim Line Mounting low profile
low profile-avoid needle bar Low profile design will not run into the needle bar.

Patent Number 7,584,708 B1 Patent Date 9/8/2009

Hoop Tech Products